ROS 2 Project
Assessment: Building a ROS 2 Humanoid Controller
This assessment challenges you to apply your knowledge of ROS 2 fundamentals to develop a basic controller for a simulated humanoid robot. The goal is to create a set of ROS 2 nodes that can publish commands to control the robot's joints and subscribe to sensor feedback, demonstrating your understanding of topics, messages, and node architecture. You will be provided with a simplified URDF model of a humanoid arm and a Gazebo simulation environment.
Your task will involve creating a Python-based ROS 2 package using rclpy. You need to implement a publisher node that sends joint commands (e.g., using sensor_msgs/JointState messages) to make the humanoid arm move to a series of predefined poses. Additionally, you will create a subscriber node to monitor the arm's actual joint states, providing feedback on the control performance. This project will reinforce your understanding of ROS 2 communication, URDF integration with Gazebo, and basic robot control.
Project Requirements
- Create a new ROS 2 Python package.
- Implement a
JointCommandPublishernode that:- Publishes
sensor_msgs/JointStatemessages to a/joint_commandstopic. - Cycles through at least three distinct arm poses with a delay between each.
- Utilizes
rclpy.timerfor periodic command publishing.
- Publishes
- Implement a
JointStateSubscribernode that:- Subscribes to the
/joint_statestopic. - Logs the received joint positions and velocities.
- Identifies when the robot has reached a target pose (within a small tolerance).
- Subscribes to the
- Write a ROS 2 launch file to start both your nodes and the provided Gazebo simulation.
- Document your code with comments and a
README.mdexplaining the package structure and how to run it.
Diagram: ROS 2 Controller Architecture
+------------------+ /joint_commands +------------------+
| Joint Command |------------------------>| Gazebo |
| Publisher Node | (sensor_msgs/JointState)| Simulator |
+------------------+ | (Humanoid Arm) |
+--------^--------+
|
|
/joint_states |
(sensor_msgs/JointState)
|
v
+------------------+ +
| Joint State |<---------------------------------+
| Subscriber Node |
+------------------+
Summary
This ROS 2 project assesses your ability to build a basic humanoid arm controller. You will create publisher and subscriber nodes, integrate with Gazebo, and demonstrate fundamental ROS 2 communication and control concepts.